1. A novel glucose-based highly selective phosphate adsorbent
Diao She, Hongxu Liang, Xuguang Du, Qiang Wang, Chenyang Xu, Zengchao Geng, Hongwei Zhang Sci Total Environ . 2021 Oct 20;792:148452. doi: 10.1016/j.scitotenv.2021.148452.
Industrial wastewater discharge leads to serious eutrophication of water bodies, but most of the adsorbents are difficult to selectively remove phosphorus and are difficult to use multiple times, therefore, developing an efficient and reusable material for removal phosphate is extremely necessary. In this work, a kind of highly selective phosphate adsorbent, microporous carbon material (MCM), based on glucose was synthesized by hydrothermal and activation method. The MCM were characterized by SEM, XPS, BET, element analysis, et al. The phosphate adsorption mechanism of MCM were investigated by batch adsorption experiment and model calculation. Results showed that MCM had a high adsorption capacity for phosphate in a wide range of pH (1.5-10). Langmuir model and pseudo-second-order kinetic revealed that the process was endothermic and involved both physical and chemical adsorption. The main phosphate adsorption mechanisms of MCM are electrostatic attraction, ion complexation, hydrogen bonding, and physical adsorption. The ions competition simulation experiment indicated that the MCM was highly selective for phosphate removal. Furthermore, the phosphate adsorption tests were carried out on five kinds of water, and the removal rates were all above 99.98%. The 20 regenerative cycles experiment revealed that the MCM had high reusability. Therefore, this kind of novel glucose-based highly selective phosphate adsorbent with multi-cycle phosphorus removal performance can improve the eutrophication of water. This study provides a new idea for phosphate removal and expands the application range of glucose-based carbon materials.
2. Phosphate adsorption characteristics of La(OH)3-modified, canna-derived biochar
Lan Ma, YiFeng Lu, ShuangRong Chen, YingMei Li, ChunHong Zhang, LingYan Liu Chemosphere . 2022 Jan;286(Pt 2):131773. doi: 10.1016/j.chemosphere.2021.131773.
La(OH)3-modified canna biochar (CBC-La) was prepared by a coprecipitation method (dipping method), and its phosphate adsorption characteristics were investigated. The results show that the pseudo-second-order kinetics and the Langmuir model can be used to describe the adsorption process with a high level of accuracy. Adsorption equilibrium could be reached at 8 h, at which point the maximum adsorption capacity was shown to be 37.37 mg/g. CBC-La has excellent phosphate adsorption capacity in the middle to low concentrations (≤50 mg/L), and its removal rate can exceed 99 %. CBC-La also has wide pH adaptability (3-9) and a strongly selective adsorption performance. Notably, it can still maintain a removal rate of over 99.8 % in the presence of certain anions (NO3-, HCO3-, and CO32-), and the presence of NH4+has a synergistic effect on the adsorption process. Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) measurements demonstrate that the main mechanisms of CBC-La phosphate adsorption are electrostatic adsorption, ion exchange, ligand exchange and inner sphere complexation.
3. How Pseudo-lignin Is Generated during Dilute Sulfuric Acid Pretreatment
Bin Luo, Qingtong Zhang, Zhuan Jia, Douyong Min, Shuangfei Wang, Guangcong Wan, Mingfu Li, Chenyan Guo J Agric Food Chem . 2019 Sep 11;67(36):10116-10125. doi: 10.1021/acs.jafc.9b02851.
Pseudo-lignin is generated from lignocellulose biomass during pretreatment with dilute sulfuric acid and has a significant inhibitory effect on cellulase. However, the mechanism of pseudo-lignin generation remains unclear. The following main points have been addressed to help elucidate the pseudo-lignin generation pathway. Cellulose and xylan were pretreated with sulfuric acid at different concentrations; aliquots were periodically collected; and the changes in the byproducts of the prehydrolysate were quantified. Milled wood lignin (MWL) mixed with cellulose and xylan was pretreated to evaluate the impact of lignin on pseudo-lignin generation. Furfural, 5-hydroxymethylfurfural, and MWL were pretreated as model compounds to investigate pseudo-lignin generation. The result indicated that the increasing acid concentration significantly promoted the generation of pseudo-lignin. When the acid concentration was increased from 0 to 1.00 wt %, pseudo-lignin was increased from 1.36 to 4.05 g. In addition, lignin promoted the pseudo-lignin generation through the condensation between lignin and the generated intermediates.
