1. A mesoporous 3D hybrid material with dual functionality for Hg2+ detection and adsorption
José V Ros-Lis, et al. Chemistry. 2008;14(27):8267-78. doi: 10.1002/chem.200800632.
Dual-function hybrid material U1 was designed for simultaneous chromofluorogenic detection and removal of Hg(2+) in an aqueous environment. Mesoporous material UVM-7 (MCM41 type) with homogeneously distributed pores of about 2-3 nm in size, a large specific surface area exceeding 1000 m(2) g(-1), and nanoscale particles was used as an inorganic support. The mesoporous solid is decorated with thiol groups that were treated with squaraine dye III to give a 2,4-bis(4-dialkylaminophenyl)-3-hydroxy-4-alkylsulfanylcyclobut-2-enone (APC) derivative that is covalently anchored to the inorganic silica matrix. The solid was characterised by various techniques including X-ray diffraction, transmission electron microscopy, Raman spectroscopy, and nitrogen adsorption. This hybrid solid is the chemodosimeter for Hg(2+) detection. Hg(2+) reacts with the APC fragment in U1 with release of the squaraine dye into the solution, which turns deep blue and fluoresces strongly. Naked-eye Hg(2+) detection is thus accomplished in an easy-to-use procedure. In contrast, U1 remains silent in the presence of other thiophilic transition metal ions, alkali and alkaline earth metal ions, or anions ubiquitously present in water such as chloride, carbonate, sulfate, and phosphate. Material U1 acts not only as chemodosimeter that signals the presence of Hg(2+) down to parts-per-billion concentrations, but at the same time is also an excellent adsorbent for the removal of mercury cations from aqueous solutions. The amount of adsorbed mercury ranges from 0.7 to 1.7 mmol g(-1), depending on the degree of functionalisation. In addition, hybrid material U1 can be regenerated for both sensing and removal purposes. As far as we know, U1 is the first example of a promising new class of polyfunctional hybrid supports that can be used as both remediation and alarm systems by selective signalling and removal of target species of environmental importance. Model compounds based on silica gel (G1), fumed silica (F1), and micrometre-sized MCM-41 scaffolds (M1) were also prepared and studied for comparative purposes.
2. Stimuli-responsive zwitterionic block copolypeptides: poly(N-isopropylacrylamide)-block-poly(lysine-co-glutamic acid)
Jingguo Li, Tao Wang, Dalin Wu, Xiuqiang Zhang, Jiatao Yan, Song Du, Yifei Guo, Jintao Wang, Afang Zhang Biomacromolecules. 2008 Oct;9(10):2670-6. doi: 10.1021/bm800394p. Epub 2008 Aug 29.
Synthesis of novel zwitterionic block copolypeptides, poly(N-isopropylacrylamide)-block-poly(L-glutamic acid-co-L-lysine) [PNiPAM(n)(PLG(x)-co-PLLys(y))m , where n is the number-average degree of polymerization (DP(n)) of PNiPAM block, x and y are the mole fraction of glutamic acid and lysine residues, respectively, and m is the total DP(n) of the peptide block], and their stimuli-responsiveness to temperature and pH variation in aqueous solutions are described. Initiated with the amino-terminated poly(N-isopropylacrylamide) (PNiPAM(n)-NH2), ring-opening polymerization (ROP) of a mixture of gamma-benzyl-L-glutamate N-carboxyanhydride (BLG-NCA), and Boc-L-lysine N-carboxyanhydride (BLLys-NCA) afforded the block copolypeptides PNiPAM(n)(PBLG(x)-co-PBLLys(y))m, with a poly(N-isopropylacrylamide) block together with a random copolypeptide block, which was then deprotected with HBr/trifluoroacetic acid into the double hydrophilic block copolypeptides, PNiPAM(n)(PLG(x)-co-PLLys(y))m. Their block ratios and lengths, as well as the amino acid residue ratios in the random copolypeptide block are varied (n = 360, x = 0.4-0.5, y = 0.4-0.6, and m = 220-252). The secondary structures of the copolypeptides in aqueous solution at different pH conditions were examined. Phase transitions in aqueous solutions induced by both pH and temperature variation were investigated by (1)H NMR spectroscopy. The transitions induced by temperature were also explored by turbidity measurements using UV/vis spectroscopy for their lower critical aggregation temperature (LCAT) determination. Furthermore, these aggregation processes were followed by dynamic light scattering measurements.
3. Preparation of highly monodispersed hybrid silica spheres using a one-step sol-gel reaction in aqueous solution
Yong-Geun Lee, Jae-Hyung Park, Chul Oh, Seong-Geun Oh, Young Chai Kim Langmuir. 2007 Oct 23;23(22):10875-8. doi: 10.1021/la702462b. Epub 2007 Sep 29.
The successful one-step preparation method of monodisperse hybrid silica particles was studied using organosilane chemicals in aqueous solution. In general, almost all of the hybrid silica materials were made by a complex method where organic materials were coated on the surface of silica substrate via chemical reaction. However, our novel method can be applied to prepare colloidal hybrid particles without using substrate material. This method has three advantages: (i) this simple method gives the opportunity to prepare hybrid particles with high monodispersity through the self-hydrolysis of various organosilane monomers in aqueous solution, (ii) this efficient method can be applied to load lots of organic functional groups on the surface of silica particles through a one-step preparation method using only organosilane, and (iii) this effective method can be used to control the particle size of the product by changing the experimental conditions such as the concentration of the precursor or the reaction temperature. Detailed characterization of the hybrid particles by scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis (TGA) was performed to elucidate the morphologies and properties of the hybrid silica particles.
