[Glu1]-Fibrinopeptide B human

Background:Matrix-assisted laser desorption/ionization (MALDI) is a soft ionization mass spectrometric technique, allowing the analysis of bio-molecules and other macromolecules. The matrix molecules require certain characteristic features to serve in the laser desorption/ionization mechanism. Therefore, only a limited number of compounds have been identified as ultraviolet- laser desorption/ionization (UV-LDI) matrices. However, many of these routine matrices generate background signals that useful information is often lost in them. We have reported flavones, coumarindione and benzimidazole derivatives as alternate UV-LDI matrices.Results:Thirty one compounds have been successfully employed by us as matrices for the analysis of low molecular weight (LMW) peptides (up to 2000 Da). Two peptides, bradykinin and renin substrate tetra-decapeptide were analyzed by using the newly developed matrices. The MS measurements were made after mixing the matrix solution with analyte by using dried droplet sample preparation procedures. The synthesized matrix materials showed better S/N ratios and minimal background signals for low mass range. Furthermore, pico molar concentrations of [Glu1]-fibrinopeptide B human could be easily analyzed with these matrices. Finally, BSA-digest was analyzed and identified through database search against Swiss-Prot by using Mascot.Conclusions:These results validate the good performance of the synthesized UV-laser desorption/ionization (LDI) matrices for the analysis of low molecular weight peptides.

An automated off-line liquid chromatography-matrix-assisted laser desorption ionization (LC-MALDI) interface capable of coupling both capillary and microbore LC separations with MALDI mass spectrometry (MS) and tandem mass spectrometry (MS/MS) has been developed. The interface is a combination of two concepts: analyte concentration from heated hanging droplets and impulse-driven droplet deposition of LC fractions onto a MALDI sample plate. At room temperature the interface allows the coupling of capillary LC separations (i.e., flow rate of <5 microL/min) with MALDI MS. With heating, it can be used to combine microbore LC operated at a relatively high flow rate of up to 50 microL/min with MALDI MS. The collected fractions can be analyzed by MALDI MS and MS/MS instruments, such as time-of-flight (TOF) and quadrupole-TOF MS. Performance of the interface was examined using several peptide and protein standards. It was shown that, using MALDI-TOF MS, [GLU1]-fibrinopeptide B could be detected with a total injection amount of 5 fmol to microbore LC. Chromatographic performance was also monitored. A peak width of 12 s at half-height for [GLU1]-fibrinopeptide B showed no evidence of band broadening due to the interface. The ability of the interface to mitigate ion suppression was studied using a mixture of 100 fmol of [GLU1]-fibrinopeptide B and 10 pmol of cytochrome c tryptic digest. Although fully suppressed under direct MALDI conditions, LC-MALDI analysis was able to detect the 100 fmol peptide with 10 s fraction collection. Finally, the ability to inject relatively large sample amounts to improve detectability of low-abundance peptides was illustrated in the analysis of phosphopeptides from alpha-casein tryptic digests. A digest loaded on column to 2.4 microg and analyzed by LC-MALDI MS/MS resulted in 82% sequence coverage and detection of all nine phosphoserine residues. It is concluded that, being able to handle both high- and low-flow LC separations, the impulse-driven heated-droplet interface provides the flexibility to carry out MALDI analysis of peptides and proteins depending on the information sought after, analysis speed, and sample size.